Change or rekey · Lundy's Lane
Smart Lock Installation in Lundy's Lane
Arthritis has made the small house key hard to grip and turn, especially with gloves on in January. Pressing a few buttons, or tapping a fob against the lock, would make coming home in winter far easier.
Smart Lock Installation
In plain words
Smart lock installation puts an electronic deadbolt or lever on your door that opens with a code, a phone, a fob or a fingerprint, and, on some models, a conventional key too. The locksmith confirms you control the property, measures the door and its holes, and makes sure the bolt travels freely, because a battery motor has less strength than a hand. The hardware is fitted with a solid strike, the maker's specified batteries go in, and the lock is set up under your own account. You leave with codes working and, on a keyed model, the override key tested and the old key retired.
How the visit goesYour mother still lives on her own, and the personal support worker, the pharmacy delivery and two siblings all need to get in on different days. Cutting keys for everyone feels wrong; a code for each person, with a log, feels right.
Lundy's Lane
How the visit goes
Signal strength at the door
If the lock is to be reached from a phone away from home, the network at the door matters as much as the lock. The locksmith checks how strong the Wi-Fi is on the door itself, not in the hallway, because a metal door, a brick wall or a router at the far end of the house can leave the entrance in a dead spot. Where it is weak, the options are a bridge plugged in near the door, a hub-based model that uses its own radio, or a Bluetooth lock that works locally and skips the network entirely. Finding this out before the box is opened avoids a lock that drops offline every evening.
Testing everything before the van door closes
The last stretch of the visit is all testing, with the door closed as in daily life. Each code is entered and the bolt watched all the way home. The app locks and unlocks the door while the phone sits at the far end of the house, and again from outside the property if the lock is online. The override key is tried in the rekeyed cylinder. The auto-lock is timed. If the model has an emergency power contact, a nine-volt battery is touched to it to prove that route. The storm door is closed to make sure nothing fouls the exterior housing. When every route in and out has behaved, the job is done.
The override key has a home
With codes doing the daily work, the mechanical key is easy to forget, and forgetting where it lives is how a dead battery turns into a lockout. On a keyed model, the locksmith hands you the new keys for the rekeyed override cylinder before leaving, and talks through where they should stay: one on a keyring that leaves the house, one with a trusted neighbour or in a combination lockbox fixed somewhere discreet. Try that key in the lock every few months so the cylinder stays free and you know it still turns. If other doors were rekeyed to match, the same key now runs the whole house, and the previous keys can go in the recycling.
Smart Lock Installation
In the van
- Thick-door extension kit
- Hand screwdrivers, Phillips and Torx
- Manufacturer-specified batteries
- Hole saw, spade bit and drilling jig
- Reinforced box strike with long screws
What affects the quote
Same fees day, night or weekend
1Removing an old mortise or non-standard lock
Older doors sometimes carry a mortise case or a lock with an unusual footprint. Filling the pocket, plugging holes and re-drilling to the standard preparation is careful joinery, and it is quoted as preparation.
2Pairing a smart deadbolt with a smart lever on the same door
Some doors get a smart deadbolt only, while others pair it with a smart lever below so both turn from one app and share the same codes. Fitting and programming two devices on one door takes more work than one, confirmed once the door and hardware are seen.
3Supplying the lock yourself
If you have already bought a lock, the quote covers fitting and setup only, with a note on whether the chosen model suits your door; if the locksmith supplies it, the hardware is listed alongside.
Smart Lock Installation: questions
Do I still get a key?
In most cases, yes. The majority of keypad deadbolts keep a conventional cylinder behind or beside the keypad, and the locksmith rekeys it during the visit so a fresh key works and the old one is retired. A few designs have no keyway at all and rely on the keypad plus an emergency power contact instead. Which you prefer is part of choosing the model, and either way the fallback route is tested before the locksmith leaves.
Can a smart lock go on a patio door, a side gate or a multipoint door?
Some can, and the locksmith will say which. Sliding patio doors use a hook or a pin rather than a deadbolt, so they take purpose-made electronic latches rather than a standard smart deadbolt. Multipoint doors, common on newer fibreglass and steel entries, lock at several points with one lever; a growing number of smart handles are built for them, and compatibility with your specific gearbox is checked first. Gates take weather-rated keypad locks designed for outdoor posts.
Fingerprint, fob, code or phone: which is worth having?
It depends on who uses the door. Codes suit everyone and need nothing in hand. Fobs or cards are a favourite for children and for anyone who finds small buttons difficult, since a tap does it. Fingerprint readers are convenient for a household of adults but can be fussy with cold, wet or gloved hands in winter, so pair them with a code. Phone control is for whoever wants alerts and remote checks. Most families end up using two of these.
Change or Rekey Locks
Smart Lock Installation near you
These are the services we bring to doors across Lundy's Lane. Residential work covers lockouts, rekeying, lock replacement, deadbolts, smart locks and older hardware brought back to life. Commercial work covers storefront doors, exit devices, closers, master keys and safes. Vehicle key cutting rounds out the list when it is needed.